try the craigslist app » Android iOS
favorite
favorite
hide
unhide
flag

Posted

print

Tripp Lite 26U Wall Mount Rack Enclosure Server Cabinet, Hinged SRW26U - $390 (Santa Barbara)

1234567891011121314

condition: like new
make / manufacturer: Tripp-Lite
model name / number: SRW26U
size / dimensions: 24x20x50 inches

I bought this Tripp-Lite SRW26U network rack with standard 19 inch rails for my home a bit prematurely, before we sorted out the space available. Although it is an amazing, commercial level hinged wall mount rack, it was one foot too big for the space I was going to use it. It is new and unused, but has a small dent. This does not interfere with function at all. Many newer homes are moving toward the mid-size network racks rather than in-wall or more discreet systems since home electronic infrastructure has grown with smart-home hubs, security cameras, switches, VOIP phones, and IP music like SONOS. This size rack gives you space for all of that in one spot.

It comes with two rack rails in the back and two in the front. You can adjust the depth. You will not get a full size server in one of these though. A small server may fit. I think you can also pick between square hole and tapped hole by rotating the rack rails. You can pop the cabinet pins out, mount the rear section and then pop the pins back in and you're done. Piece of cake. Having access to all four sides (through the front, both sides and then swinging open to access the back) makes it very easy to use. There are some space limitations, since the effective max equipment depth is 20.5" (22" deep total, but 4" of that is the depth of the part that stays mounted to the wall). But, to go bigger gets your full server rack size. This thing already weighs over 100 pounds. See dimensions in the listing. Comes with 2 keys and cage nuts.

https://www.tripplite.com/smartrack-26u-low-profile-switch-depth-wall-mount-rack-enclosure-cabinet-hinged-back~SRW26US

* Secures 26U of 19 in. rack equipment up to 20.5 in. deep
* Maximum load capacity of 250 lb.
* Swings away from wall on hinge for easy back-door access
* Mounts to wall or rolls on floor(with optional SRCASTER)
* Fully assembled
* 5-Year Limited Warranty & PCI-Compliant (not sure if this is valid if re-sold)

The Ideal Solution for Rackmount Equipment in Space-Constrained Environments
Tripp Lite’s SRW26US is constructed with a sturdy wall-mount bracket and heavy-duty steel frame, it supports a maximum weight capacity of 250lbs and provides 26U of rack space! To give you quick, convenient access to rackmounted equipment, the cabinet is hinged to swing away from the wall-mount bracket. The SRW26US is packed with premium features designed to simplify rack equipment installations: top and bottom cable routing ports, perforated door and side panels to promote efficient airflow, adjustable vertical mounting rails and more.

Vented Top and Bottom Panels & Versatile Setup
The top and bottom panels of the SRW26US are furnished with vents designed to help remove warm air from the enclosure and draw in cool air by convection. They also support installation of standard user-supplied case fans. The top and bottom panels are also provided with ports for cable routing through the movable portion of the enclosure or the fixed wall bracket. Removable covers block unused cable ports.

The SRW26US can also be configured as a freestanding, rollaway floor unit with Tripp Lite's optional Rolling Caster Kit (Model SRCASTER).

Simple Equipment Installation & Five Year Warranty
The SRW26US's sturdy wall bracket enables the enclosure to be mounted off the floor, saving valuable space. The bracket features a sturdy hinge that allows the enclosure to swing away from the wall for convenient access to equipment and cabling. The swing direction can be reversed by rotating the enclosure 180 degrees before installation. The wall bracket locks to secure equipment in general-access areas. The lockable front door and lockable, removable side panels assure ease of installation and convenient service access to installed equipment. Both door and side panels are perforated to promote efficient airflow. Equipment can be mounted 20.5 inches deep.

The SRW26US comes with a 5-Year Warranty and meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance.

Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect, house and protect your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.
  • do NOT contact me with unsolicited services or offers

post id: 7023285648

posted:

best of [?]