favorite
favorite
hide
unhide
flag

Posted

print

Surface mount Pick&PlaceLaser Chip, Array, Detector and Epoxy Dispens - $40,000

Surface mount Pick&PlaceLaser Chip, Array, Detector and Epoxy Dispens 1 thumbnailSurface mount Pick&PlaceLaser Chip, Array, Detector and Epoxy Dispens 2 thumbnailSurface mount Pick&PlaceLaser Chip, Array, Detector and Epoxy Dispens 3 thumbnailSurface mount Pick&PlaceLaser Chip, Array, Detector and Epoxy Dispens 4 thumbnail
condition: like new
make / manufacturer: Roys Inc.
model name / number: System 110
The system was developed and built by Royce Inc. (Malcolm Cox, former Dage Precima Eng) The system programmable to pick up laser chip, array, detector and inspect before placement on the heat sink. Also, the system can be used for dispensing epoxy for chip bonding.
The system stepping automatically for placement. Have a tray with mirror bottom for inspecting the chip P and N side and rotate left or right infinite before placement. The pick up tip not smashing a chip if you put too much pressure on it because the system will release the tip movement. Pressure of the pick up tip can set.
Have a RS-232 computer port. Can be attached camera and monitor to see the object in a larger magnification prior placement. ( not include ). Can be attach pulse test prior chip placement. ( not include )
The system have a large program availability for different size and pitch laser chip, array, detector placement and for different heat sink size.
The system need vacuum 20" Hg. Dry Air= 40 psi. 110 V @ 2 Amp or 240 V @ 1 Amp
A great system for R&D and production.
Have operation manual.
Fixture system for C-mount and 9mm heat sink available for extra cost

post id: 7759279075

posted:

updated:

best of [?]

loading
reading
writing
saving
searching