Legendary Spica TC-50 considered one of the best imaging speakers
There is a website devoted to just this speaker
In good working order just a few minor dings
Including stands !
Two-way, stand-mounted loudspeaker. Drive-units: 1" soft-dome tweeter, 6.5" pulp-cone woofer. Low-frequency alignment: sealed-box with Q=0.78. Crossover frequency: 2kHz. Crossover: high-pass slope, approximately first-order, 6dB/octave; low-pass slope, fourth-order, 24dB/octave, Bessel; both drivers connected with the same polarity. Frequency response: 60Hz-17kHz -3dB. Sensitivity: 84dB/W/m. Nominal impedance: 4 ohms (3.6 ohms minimum at 4kHz). Amplifier requirements: 25-100W. Maximum power handling: 50W continuous, 100W peak.
Dimensions: 15.5" (394mm) H by 13" (330mm) W by 11.6" (295mm) D. Weight: 20 lbs (9.07 kg) each.